![]() ![]() ![]() The standard, freestanding fridge/freezer combination typically measures 60-70cm in width and has a height of 83cm to over 174cm on the largest models, with 122.5cm, 157cm and 175cm being seen most frequently. This type of fridge is the most common appliance in this category within UK households. How this is arranged, and the door configuration is up to the individual manufacturer. Fridge and Freezer Dimensions and Sizesįridge and Freezer Dimensions and Sizes Fridge/Freezer Combi SizeĪ fridge/freezer combi is a freestanding unit that typically has the fridge part in the upper section and a freezer section below, but this can vary as demonstrated in the image above.Check the defrost system, cooling fans, and cooling controls first. If the refrigerator is not cold enough the main control board might be defective. If the compressor itself is defective a licensed professional will need to replace it. There are several other components which are more likely to be defective if the compressor doesn't work. The compressor is a motor which compresses the refrigerant and circulates the refrigerant through the evaporator and condenser coils. If the refrigerator is not cold enough, the compressor might be defective. Check all other components to be certain this is the cause of the problem. The temperature control board provides the voltage to the fan motors and compressor. If the refrigerator is not cold enough the temperature control board might be defective. If the thermistor is defective the refrigerator does not cool or may cool continuously. The thermistor is a sensor which monitors the air temperature. If the refrigerator is not cold enough the thermistor might be defective. Test the start capacitor first with a capacitance meter, they don't fail often. If the start capacitor is burned out the compressor might not be able to start and run as often as it should. The start capacitor serves as a battery to give the compressor a little boost during start-up. If the refrigerator isn't cold enough the compressor might be having difficulty starting. If the cooling system fans and compressor are running, but the refrigerator or freezer is not cooling correctly check for an airflow or defrost system problem. ![]() The thermostat allows power to flow through to the compressor, evaporator fan and condenser fan. If the refrigerator does not get cold enough the temperature control thermostat might be defective. The start relay should be replaced if defective. If the start relay is defective the compressor may run intermittently or not at all and the refrigerator will not get cold enough. It provides power to the run winding along with the start winding for a split second at start-up to help get the compressor started. The start relay is a small device mounted to the side of the compressor. If the refrigerator is not cold enough, the start relay may be defective. Pull the refrigerator out from the wall and remove the access panel to access it. The condenser fan motor is located underneath the refrigerator near the back. The condenser fan motor draws air over the condenser coils to cool them. If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. If the fan is not working, no cold air will get to the refrigerator compartment. If there is only one evaporator it is in the freezer side. The evaporator fan motor circulates the cold air from the coils thru the compartment. The refrigerator may have one or more evaporator fan motor(s) depending on the model and evaporator locations. Every refrigerator has a set of coils called an evaporator. If the refrigerator is not cold enough, the evaporator fan motor might have failed. ![]() A dirty coil is the first thing to check and you did. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |